tag sizevar pTag = content.find('p'),pNum = parseFloat(pTag.css('font-size'), 10);// sizevar spanTag = content.find('span'),spanNum = parseFloat(spanTag.css('font-size'), 10);// header tagvar header = content.find(':header'),headerNum = parseFloat(header.css('font-size'), 10);// block link description textvar linksBlock = $('[data-type="links"]'),linksDesc = linksBlock.find('.media-content');if (operation == 'increase') num = num * 1.4;pNum = pNum * 1.4;spanNum = spanNum * 1.4;headerNum = headerNum * 1.4;if (operation == 'decrease') num = num / 1.4;pNum = pNum / 1.4;spanNum = spanNum / 1.4;headerNum = headerNum / 1.4;content.css('font-size', num + unit);pTag.css('font-size', pNum + unit);spanTag.css('font-size', spanNum + unit);header.css('font-size', headerNum + unit);linksDesc.css('font-size', num + unit);});});EasyBlog.require().script('site/posts/posts', 'site/posts/readingprogress').done(function($) // Implement post library$('[data-blog-post]').implement(EasyBlog.Controller.Posts, "ratings": true);$('[data-blog-post]').implement(EasyBlog.Controller.Posts.Readingprogress, "autoload" : false););EasyBlog.require().script('site/posts/entry', ' =').done(function($) var trackingId = '';$('[data-eb-posts]').implement(EasyBlog.Controller.Entry, "autoload": true,"ga_enabled": false,"ga_tracking_id": trackingId,"currentPageUrl": " -machines/download-free-lasercut-5-3-and-installation-process"););
laser cut 5.3 software crack
Most laser cutter software requires the user to prepare their files on the one computer that currently has the USB dongle. In communal workspaces this can cause a bottle neck on the laser cutter while people wait for the dongle and the laser cutter is not actually in use during most of this time. The demo mode can be used to prepare cutting files without the USB dongle and without being attached to the laser cutter. There are two methods for transferring files from the demo mode to the laser cutter, cutting files can be made that are transferred directly to the laser, or Lasercut files can be saved and opened when the user does have the USB dongle. The method for creating cutting files is much more reliable and it is advisable to do this before attempting to save the Lasercut files.
How to dump its firmware image and make the virtual USB Port as Smart Card reader ?PS :2 years ago, another guy also asking the same question as me at : =4360I already read the following post at : Can i crack usb security dongle? Programmable USB donglesAnd I'm running my USB Dongle at Windows XP and Windows 7 64bit.
LaserCut 5.3 is a dedicated laser cutter control software that acts as a communication platform between the computer and the laser cutter. It is used to prepare cutting files that are sent to the controller hardware inside your laser cutter.
LaserCut has some basic drawing functions but it becomes most useful when DXF or PLT vector files are imported into the software for upload to the laser cutter. These vector files are created in other drawing packages, such as CorelDraw, Adobe Illustrator, AutoCAD, Inkscape, or the school favourite 2D Design.
Once a vector file is drawn it can be imported into LaserCut, meaning that the machine is not tied down to one specific software, and is instead essentially compatible with any software that can produce the file type. This is particularly helpful as businesses and schools may wish to update or change the design software they use. Furthermore, communication between the software and the laser machine is largely unaffected by operating system updates.
Lasercut 5.3 operates via a USB dongle which contains the software license and can only be used on one computer at a time. The target computer will require a spare USB port for the dongle and a spare USB port for the laser machine communication cable. Additional license dongles can be purchased if required, please contact us for more information.
When opening an ECP file LaserCut looks for the INI and G00 files in the same directory automatically. If the files are missing (or if an ECP file is imported as above, rather than opened) the design and colour information will be retained but layer order and laser settings will be lost. For ease of managing these sets of files it is recommended to manually save each project into it's own folder.
The LaserCut interface consists of file handling, navigation and advanced function buttons long the top row, design tools on the left, the laser options panel on the right and a colour palette on the bottom row. Tooltips will show the name of a tool if the mouse is hovered over a button. The box in the centre refers to the 1200x900mm work area of the laser cutter. Please note if you are planning on using the honeycomb bed the actual usable area is slightly smaller due to the frame.
If the Immediate checkbox in the laser settings panel on the right is unchecked then the design will be cut where it is placed within the work area shown on screen. There are no reference markings on the laser bed itself however, and this mode requires re-downloading your design to the laser cutter each time in order to move it around your material.
LaserCut uses colours to signify layers. These allow you to choose the order of cuts or to cut parts of the design using different settings.Unless you have incorporated LaserCut compatible colours into your design all lines will be black by default. To change colours select the area to change and click on a colour from the bottom palette.In the image above the design uses two layers, Blue and Black. In the laser settings panel to the right these are ordered so that Blue will be cut first, so that the inner detail will be cut before the piece is cut out from the sheet material. To change the order click on one of the layers in the laser settings panel, and click the Up or Down buttons.
Primarily used to engrave raster (pixel based) images rather than vector line drawings. In this mode the laser head will move back and forth over the material in a similar manner to an inkjet printer, taking significantly longer than a vector operation. Inputs should either be a high contrast black and white Bitmap, Jpeg or TIFF image where black will be engraved and white will not, or or an enclosed vector shape where the entire inner area will be engraved. Double click on the Power or Speed columns to open the options.
A vector based mode similar to cut, but will perforate holes along the line rather than a solid cut. The holes are just tine dots made with a static laser, so the only limited control over hole size is the Radiation time setting. Double click on the Speed or Power column to open the options.
Once your design is ready to be cut you must download it to the laser cutter. With the laser powered on press the download button at the bottom of the laser options panel, the Stand-alone file manage window should open.Click Del all to delete the previous file followed by Download current to download the current design. If you get an error message or file manager with many unnamed files in it, the laser cutter may be off or the USB connection may have been interrupted requiring unplugging and reconnecting. The the laser cutter is the silver USB cable in the front of the laser PC.
Lasercut 5.3 is required to prepare a design file for our laser cutter. Its drawing functions are apparently quite terrible, so pretty much all users in forums etc. recommend to only use it for the very last steps!
We got a copy of LaserCut 5.3 from HPC Laser. You can get it from the orange USB drive located next to the laser cutter. However, the version we got does only work with the "soft dog" USB dongle, which will be attached permanently to the dedicated PC.
In order to prepare files on your own computer, you can install the software from another source. Most sources include an executable called "Lasercut53_Demo.exe" which can be used without the dongle but cannot operate the machine itself. The demo version also does not want you to save or open project files, but there are workarounds:
Please note that LightBurn does not support the stock M2-Nano board in the popular K40 laser. This board does not offer control of power through software - we recommend upgrading the board to take full advantage of LightBurn.
Laser cutting is a technology that uses a laser to vaporize materials, resulting in a cut edge. While typically used for industrial manufacturing applications, it is now used by schools, small businesses, architecture, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) is used to direct the laser beam to the material. A commercial laser for cutting materials uses a motion control system to follow a CNC or G-code of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas,[1] leaving an edge with a high-quality surface finish.[2]
In 1965, the first production laser cutting machine was used to drill holes in diamond dies. This machine was made by the Western Electric Engineering Research Center.[3] In 1967, the British pioneered laser-assisted oxygen jet cutting for metals.[4] In the early 1970s, this technology was put into production to cut titanium for aerospace applications. At the same time CO2 lasers were adapted to cut non-metals, such as textiles, because, at the time, CO2 lasers were not powerful enough to overcome the thermal conductivity of metals.[5]
Advantages of laser cutting over mechanical cutting include easier workholding and reduced contamination of workpiece (since there is no cutting edge which can become contaminated by the material or contaminate the material). Precision may be better, since the laser beam does not wear during the process. There is also a reduced chance of warping the material that is being cut, as laser systems have a small heat-affected zone.[8] Some materials are also very difficult or impossible to cut by more traditional means. 2ff7e9595c
Comments